Skip to product information
1 of 1

APR

APR - ECU Upgrade - Stage 3+ PMAX w. MPI & LPFP - AUTH | NON CUSTOMER

APR - ECU Upgrade - Stage 3+ PMAX w. MPI & LPFP - AUTH | NON CUSTOMER

SKU: SW100060-04A
Regular price $649.95
Regular price Sale price $649.95
Sale Sold out
Shipping calculated at checkout.
Quantity
Factory ECU-Controlled Stage 3+ Performance + Multi-Port Injection (MPI) and Upgraded LPFP Fueling. Proven 5.15s 0-60 MPH • 8.64s 60-130 MPH • For 2022+ VW GTI. 500+ WHP, 350/400 WTQ calibrations.

Overview

The factory fueling system, not the turbo, is the real ceiling on the EA888 Gen 4. APR's Stage 3+ System breaks through it, pairing Garrett's PowerMax GT2563S turbocharger with APR's fully integrated Multi-Port Injection (MPI) and Low-Pressure Fuel Pump (LPFP) system to unlock true Stage 3+ output while keeping the factory ECU in complete control. Every component, Bosch Motorsport port injectors, a brushless low-pressure fuel pump, high-range MAP sensors, and APR's proprietary calibration, was engineered together as one ecosystem, not bolted on. The result is a factory-refined driving experience with none of the compromises of standalone engine management or auxiliary injector controllers: OEM cold starts, idle quality, drivability, diagnostics, and factory safety strategies all remain intact. Available in 350 WTQ and 400 WTQ calibrations across 91, 93, 100, 104 Octane, and E85 fuel, the system is validated to support 500+ wheel horsepower and back it up on the road: 0-60 MPH in 5.15 seconds and 60-130 MPH in just 8.64 seconds, real-world acceleration, not a dyno number.

Features:

  • Supports 500+ wheel horsepower through a complete, purpose-built Stage 3+ fuel system for the EA888 Gen 4 platform
  • Garrett PowerMax GT2563S turbocharger paired with APR's Multi-Port Injection (MPI) and upgraded brushless LPFP, using genuine VW Golf R pump and controller
  • Retains full factory ECU control, no standalone engine management or auxiliary injector controller required
  • Available 350 WTQ and 400 WTQ calibrations supporting 91, 93, 100, 104 Octane, and E85 fuel
  • Closed-loop fuel pressure monitoring with APR Fuel Pressure Protection strategies safeguards the engine
  • Torque-by-gear calibration optimized for front-wheel-drive traction and real-world drivability
  • Preserves OEM-style cold starts, idle quality, diagnostics, and factory safety strategies for daily-driver refinement alongside Stage 3+ power
  • Proven 5.15s 0-60 MPH and 8.64s 60-130 MPH acceleration, real-world validated, not just a dyno number
  • Optional upgrade path to APR DQ381.2 TCU software for customers running the 400 WTQ calibration

Specs

Brand APR
Category Vehicles, Equipment, Tools, and Supplies
Emission Code 7
part type Vehicle Tuning Software
Product Type Vehicle Tuning Software
Sub Category Software
UPC 000000000000
Part Number SW100060-04A

Emissions

7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Tech Resources

Specific matching Stage 3+ software is REQUIRED to use this system (ECU + TCU). Software is included for existing APR customers upgrading to APR Stage 3 ECU/TCU from lower stage (1/2). Please check software compatibility prior to purchase or installation. To achieve the advertised power, an intake and intercooler are required (APR recommended). Factory 10,000 mile oil intervals are excessive. Cut oil intervals in half when upgrading to Stage 3 Turbo Systems. To add an additional layer of protection, use a high performance oil matching the factory weight and minimum factory specs.
View full details